Crackle Fried Marbles

I see the crackle fried marble is back in fashion again.
Mother and I would make these by the cake pan full and turn out jewelry and crafts for months.
Dangle earrings, necklaces, car dangles, key chains ,we glued them on clear glass and filled the fish bowl with them.
Here is a few methods for the fried,crackle glass.
We only used the oven method 45 years ago.Lost about 3 out of every 30 that flat shattered into tiny pieces.So don't worry when they don't all come out perfect.



How to Make Fried Marble Jewelry

Frying marbles is a very simple process and makes some really pretty jewelry.
Difficulty:EasyInstructions
things you'll need:

Bag of solid color, transparent marbles.
Frying pan
Wooden spoon
Large Pot
Cold Water
Ice
1 Place the marbles in the frying pan. I used a non-stick pan, but I don't think it matters as there's nothing sticky that will ruin your pan. Turn the heat to medium high.

2 Fry the marbles, stirring a lot. I wouldn't say "stir constantly," but you want to keep them moving so that they don't heat up too much in one spot. Fry them for 15-20 minutes.

3 While the marbles are frying, or you before you start, fill up a large pot with cold water and lots of ice.

4 When finished frying the marbles, immediately pour them into the ice water. The marbles will shatter on the inside while retaining their round shape on the outside. It resembles shimmering glass.

5 The first picture above shows a finished necklace I made by creating a cage with sterling silver wire and attaching to a sterling silver chain. You can easily change the marble to a different colored marble by pushing open the back of the cage, popping out one marble, and replacing it with another. Wire wrapping is a technique that takes some practice and more instructions. I'll try to post a tutorial for that soon. But, there's an easier way to make a necklace and this is my best seller.

6 Blue, White (Clear), and Green Fried Marbles

Buy some pre-assembled wire bead cages. There are many online sources and can also be found at any craft or beading store. Thread a chain, ribbon, or cord through the bead cage. Then, insert your fried marble by pushing open the middle of the cage and popping the marble into the cage. The bead cage will spring right back to it's original shape. Wear and enjoy!

Oven Method

Make inexpensive   by baking and internally cracking ordinary marbles. Make up a few as gifts or for your next hot seller at a craft fair.
Difficulty: Easy
Things You'll Need:

Pie Pan
1 Bag Of Marbles
Bowl Of Ice Water
Oven
Jewelry Bell Caps
E6000 Glue
Jewelry Jump Rings
Necklace
2 Pairs Of Needle Nose Pliers

1.) When you purchase your marbles, purchase can any regular, one color or cat eye marbles. If you use a two tone color marble the marbles will not get a crackling appearance, instead they will just crack in half.

2.) In a medium size, metal bowl place 3 cups water and five ice cubes. For each batch of marbles that you fry be sure to replace the ice cubes. The marbles need to go from a fire, hot oven right into freezing, cold water in order to create the crackling affect.

3.) Place marbles in a metal pie pan and place them in a 500 degree oven for 20 minutes to heat them thoroughly. There might be a few that will crack in half while you are heating them up. This is O.K. and perfectly normal.

4.) Remove the marbles from the oven after 20 minutes. Pour them directly from the pie pan into the ice cold water. Let them cool for about a minute. When you remove the marbles from the water you may find some have broken, if they do just throw them out. It's the marbles that are in intact but have a crackling effect inside and out that you are going to use for the next step.

5.) Dry each marble completely. Place E6000 glue on the bottom or underside of each bell cap and place it on the top of each marble one at a time. The glue does dry to the touch fairly quick but you can not wear the necklace for 24 hours until the glue has completely setup.

6.) When the bell cap is dry, usually within 24 hours add the jump ring to the bell cap. To attach the jump ring to the bell cap you will need two sets of pliers. Hold one set of pliers in each hand. Place the jump ring in your left hand pliers, holding the rings left side with the split side up. Take your pliers in your right hand and gently grasp the right hand side of the jump ring and push backwards to open it. Slip the bell cap hole in the split ring. Place the necklace inside of the opened split ring to. Be careful that the necklace does not go into the bell cap hole, just the split ring should be in the bell cap. Then use both sets of pliers, one on the right hand side of split and one on left hand of split to gently rock the ring back and forth, moving it closer to closing the split ring gap.

Free Recipe Cards For The Red White and Blue

The Dye Garden

Some easy to grow plants for dye.


• Yarrow (Achillea hybrids). The plant tops produce mostly yellow, tan and gold colors. It is a tough and hardy perennial in the garden and flowers from early summer to late fall.


• Marigolds (Tagetes spp. and hybrids). The flowers and leaves will produce a variety of colors, depending on the mordant, from bright yellow and gold to dark brown.

• Yellow cosmos (Cosmos surphureus). This annual flower blooms in yellow, orange, even red, including cultivars such as ‘Bright Lights’, ‘Diablo’ and ‘Sunny Red’. The flowers in a dye bath produce golden colors, oranges and rusty browns.

• Sunflower (Helianthus annuus). This common, cheerful flower is an annual that can tower to 4 or 6 feet by season’s end. It yields a array of soft green colors in the dye bath.

• Hibiscus (Hibiscus hybrids), also called rose mallow. Look for red-blooming varieties of this perennial shrub, and in the garden, give it about 2 feet of space on all sides. Harvest the flowers as they bloom, as they won’t last more than a day or so. The petals can yield many colors, from purple and green to gray, even black.

• Indigo (Indigofera suffruticosa, I. tinctoria). This perennial shrub thrives in warm climates, and elsewhere is an annual. The fresh leaves contain the classic blue pigment.

• Purple basil (Ocimum basilicum purple-leaved varieties such as ‘Dark Opal’, ‘Red Rubin’ and ‘Purple Ruffles’). Annual in most climates, purple basil can reach about 2 feet. Use fresh tops in a dye bath for a variety of greens and browns.

• Marjoram (Origanum majorana). Generally an annual, this oregano relative yields yellows, oranges, browns and grays, depending on the mordant used. It stays under 12 inches and is easy to grow.

• Weld (Reseda luteola). This biennial or annual is a traditional European dye herb, with flower stalks that can reach 3 feet or more. The leaves and flower stalks produce strong yellows and pale greens.

• Black-eyed Susan (Rudbeckia spp.). This easy, popular perennial plant blooms summer to fall. The leaves and flowers produce golds, browns, oranges and dark greens.

• Goldenrod (Solidago spp.). This native perennial can reach 4 or 5 feet by season’s end, so give it some space. Plant stalks produce yellow and orange to tan, brown and rust colors.

• Zinnias (Zinnia elegans and other species). This easy annual bedding plant is available in both transplants and seeds. Harvest the flowers regularly to keep it blooming all summer. The flowers yield pale yellow colors.
Colors blended from Plants

BLACKS
Alder Bark
Ash Bark
Walnut Hulls
Bugleweed

BLUES
Indigo
Larkspur
Bayberry Berries
Blueberry Fruit

BROWNS
Apple Bark
Laurel Leaves
Maple
Tea Root

PURPLES
Cedar Root
Dandelion Root
Vine Plant Berries
Elderberry Fruit

REDS
Bedstraw
Cochineal
Pokeberry
Dogwood Root

YELLOWS
Broom Plant
Catnip Stalk
Onion Skins
Tomato Vine

GOLDS
Aster Plant
Cocklebur Plant
Dahlia Flower
Madder Root

GREENS
Ash - White
Cane Leaves
Solomon's Seal
Mistletoe Leaves
 
 http://www.herbcompanion.com/gardening-plans/garden-spaces-grow-these-herbs-to-make-natural-dyes.aspx#ixzz1LUFwmGC0

Apple Crostata with Caramel Sauce

PREP TIME
20 Min

TOTAL TIME

1 Hr 25 Min

SERVINGS - 8

 

INGREDIENTSCrust
1 1/4 cups Gold Medal® all-purpose flour
2 tablespoons sugar
1/4 teaspoon salt
1/2 cup firm butter or margarine, cut into 1/2-inch pieces
3 tablespoons cold water
1/4 teaspoon vanilla


Filling and Topping
1/2 cup sugar
3 tablespoons Gold Medal® all-purpose flour
4 cups chopped peeled apples (4 medium)
1 tablespoon sugar
1/2 teaspoon ground cinnamon
1 cup caramel topping


 In medium bowl, mix 1 1/4 cups flour, 2 tablespoons sugar and the salt. Cut in butter, using pastry blender (or pulling 2 table knives through ingredients in opposite directions), until particles are size of small peas. In small bowl, mix water and vanilla; sprinkle over flour mixture, 1 tablespoon at a time, tossing with fork until all flour is moistened and dough almost cleans side of bowl (up to 1 tablespoon more water can be added if necessary).
2 Gather dough into a ball; shape into flattened 5-inch round on lightly floured surface. Wrap in plastic wrap; refrigerate about 30 minutes or until firm.
3 Heat oven to 400°F. With floured rolling pin, roll pastry into 12-inch round. Place on ungreased large cookie sheet.
4 In large bowl, mix 1/2 cup sugar and 3 tablespoons flour. Stir in apples until coated. Mound apple mixture on center of dough round to within 2 inches of edge. Fold edge of dough over apple mixture; crimp edge of dough slightly. In small bowl, mix 1 tablespoon sugar and the cinnamon; sprinkle over apples and dough.


5 Bake 27 to 32 minutes or until crust is golden brown. Cut into wedges. Serve warm drizzled with caramel topping.
A bettycrockerRepice

Frisbee Bird Feeder

Bird feeder made from mainly recycled materials.

Approximate Time: 30 min - 1 hour

Supplies:
•2 bolts, washers, and nuts
1 empty grated cheese container
strong glue - like Goop
screw driver
2 Frisbees
drill
long needle nose tool
wire and "s" hook
Instructions:


I have two Chihuahuas and the last thing they would ever do is play with a Frisbee, so when we received two free ones I knew I had to come up with something. Here's what I did:

1.Drill holes in the center of the Frisbees top and bottom, also top and bottom of the container, the same size as the bolts you will be putting through.

2.Drill the bottom Frisbee with several holes for water drainage. Drill two small holes (across from each other) near the bottom of the container about 1/2 inch from the bottom. These holes should be about 1/3 inch wide.


3.Match up the container top to the underside of the top Frisbee and glue.

4.Put bolt through top and bottom set of holes, add washer and then the bolt, tighten. For top section have a loop of wire ready to wrap around the bolt before tightening. For the bottom use the needle nose to brace the bolt from inside the container while using the screw driver on the outside of the Frisbee.

5.Now it's ready to fill, turn the top Frisbee and the container cap should screw right off with it. Some bird seed may come out of the bottom feeding holes, but if the drainage holes are small the seed will stay in the Frisbee. Add your "s" hook and it's ready to hang.


Hope I have explained this well enough, if not let me know. I just set it out this morning so I haven't seen any birds yet, but once I do I am going to try to get some photos.

By NoRulesArt from Sunny FL

Tool Belt Dads card

This delightful card was made by forum member Crazysue.
A DAD card that resembles a tool belt.
Very creative Sue !

A tutorial can be found HERE

And another HERE

Mold making

Flowers to make and SAve

Check out this great tutorial blog.

Full of wonderful tutorials many of them flowers

Found HERE

Free Quilt Patterns

Great site for simple free quilt patterns found HERE

Owl PDF Download Pattern

Crystal Eggs

Found on Martha Stewart and Professor Figgy's site.

These wonderful crystal Eggs.

What a great way to spend time with a child and make your own crystals.

The whole kit id offered on Figgys site for only 20.00 dollars along with a few other great kits.

Check out the sites and enjoy the science !

Tools and Materials

•Blown-out eggshell (Get the How-To)
•Alum powder
•White glue
•Small paintbrush
•Plastic or glass container
•Egg dye
•Hot water
•Craft stick or spoon
•Latex gloves
•Drying rack or newspaper
Crystal Egg Geode How-To

1. Start by blowing out a large white chicken egg (Get the How-To) and splitting it in half, lengthwise. The egg can be cracked by striking it against a surface or cut with a small pair of scissors. Make sure the inside of the eggshell is clean and dry.

2. With a small paintbrush, apply white glue to the inside and cracked edges of each half of the eggshell and sprinkle with alum powder until completely coated. Set eggshell halves aside to dry overnight.

3. The next day, prepare your growing solution in a glass or plastic container by using a craft stick or spoon to mix 2 cups of very hot water (almost boiling) with an entire packet of powdered egg dye. Be sure to wear latex gloves to protect your hands from the dye. (Tip: Liquid food coloring can also be used to dye the geode -- 30 to 40 drops will adequately saturate the solution.)

4. Add 3/4 cup of alum powder to the hot dye bath and stir until completely dissolved. If there are remaining crystals in the bottom of the container, place the solution in the microwave for a few minutes to dissolve them. This will prevent alum from being drawn away from the geode.

5. Once the alum is completely dissolved, let the solution cool slightly (for about 30 minutes) and then submerge one of the dried, alum-coated eggshells in the growing solution, allowing it to rest on the bottom of the container with the inside of the shell facing up.

6. Set the container aside in a safe place overnight to allow the crystals to grow undisturbed. (Tip: The longer the eggshell is in the solution, the larger the crystals in the geode will be. Twelve to 15 hours will usually result in a perfect geode.)

7. The next day, remove the geode from the growing solution very carefully (as wet crystals are quite fragile), being sure to wear latex gloves to prevent the dye from staining your hands. (Tip: If you are not satisfied with the size of your geode crystals, return the geode to the growing solution and wait a day or two. As water evaporates from the solution, more alum will be deposited in your geode, increasing the size of the crystals.)
8. Place your geode on a drying rack or newspaper and allow to dry completely before handling.
9. To grow a second geode in the other half of the eggshell, simply re-dissolve the crystals remaining at the bottom of the growing solution in the microwave and follow the instructions above starting at step 5.

Additional Tips
Geodes can be grown without using egg dye. The resulting crystals are clear to milky white, like quartz.

Chick Gift tags to Print

300 Piece Vintage Easter Puzzle

Solve the Puzzle HERE

Fabric Flower Tutorial

This pretty fabric flower tutorial is

Found HERE

Quick Red beans and rice Recipe

A traditional meal in the south typically served on Monday night.

Ingredients:
3/4 Vidalia or otherwise sweet onion
2 cans small red beans
1/4 cup white wine
1 teaspoon powdered sage
1 teapoon powdered thyme
2 cloves garlic (crushed)
1-2 tablespoons Cayenne chile powder
3 bay leaves
4 tablespoons brown sugar
2 teaspoons paprika
1/2 teaspoon chipotle (goes a loooong way)
1 teaspoon salt
1 teaspoon black pepper
2 tablespoons fresh parsley (chopped)
10-15 button mushrooms (quartered)
1 diced fine green pepper
1 cup white rice
Leave as is for vegetarian or pick your meat of choice.
Serves 4
Start by caramelizing the onions in a cast iron skillet. Once the onions are done,
de-glaze the pan with white wine. Coarsely chop the onions and add them to a large
pot holding the two cans of small red beans with their liquid on low heat. Add diced green peppers Also,
pour the pan de-glazing liquid into the pot of red beans. As the beans are heating, take
a potato masher and crush just a few of the beans in the pot to make for variety of texture.
Then start seasoning the beans and onions with the sage, thyme, two crushed garlic cloves,
chile powder, paprika chipotle flakes, salt, pepper, bay leaves and sugar. Stir the beans and
evenly mix in the spices then add the mushrooms into the bean mixture.
Heat on medium heat until mushrooms are cooked then ladle over cooked rice
(two cups water per cup of rice and cook until tender) and eat or place beans in
refrigerator over night to let the flavors mix. We like to eat our red beans and rice with spiced shrimp.
I cook the large shrimp in a l;arge fry pan with 3 tablespoons of butter ,5 teasppons of hot sauce,1 teaspoon of cayanne pepper a dash of salt and simmer very low .
Turning once as they turn 1/2 way pink. Approx 4 mins.
 Then put them over the top of the beans and rice.

Recycle Seed Starts

The last two weeks have been really warm so of course I got my seeds started.
We have snow today but the seeds are started and will be moved to the cat buckets under plastic in about 3 weeks.
My seeds are started in egg cartons inside recycled cake containers.
I set them on top of the freezer or fridge for a few days until they sprout then move to a towel on the kitcken island for another few weeks.
You just lift the egg cartons out cut apart and plant straight into the soil when there ready.

Recycle Cat Litter Buckets

Many of you have asked do I recycle.
Well of course.
I have a cat and there is nothing better then the cat buckets for ,well,everything.
In the winter they sit on the counter with my herbs growing in them.
In the summer they make great planters with a bit of new soil each year.
WE painted the buckets White and left the handles on .

I drilled holes in one all the way around and use it as a potato bin.
Cat litter buckets !

Car Runs On Air ?

Apple BBQ Sauce REcipe

Chicken filet Crochet

INSTRUCTIONS:

Startinq at bottom of pattern chain 103. Chain 3 to turn which will count as first double crochet of first row. Ch 2 more and Double crochet in 9th chain from hook to complete bottom right open square of pattern. Continue following pattern for first row reading pattern right to left. After completing first row, chain 3 to turn to start next row. Continue following pattern until all rows are complete. At end of row 30 fasten off. (See "How to read pattern" below)

MATERIALS (based on crochet cotton size):
Using Crochet Cotton no. 5: about 131 yds, steel crochet hook US size 4
Using Crochet Cotton no. 10: about 116 yds, steel crochet hook US size 7
Using Crochet Cotton no. 20: about 109 yds, steel crochet hook US size 9
Using Crochet Cotton no. 30: about 102 yds, steel crochet hook US size 11
APPROXIMATE FINISHED SIZES:
Using Crochet Cotton size 5 width = 9.4 inches, height = 9.5 inches
Usinq Crochet Cotton size 10: width 7.8 inches, height = 7.5 inches
Using Crochet Cotton size 20 width = 7.5 inches, height = 7.2 inches
Using Crochet Cotton size 30: width = 7.1 inches, height = 6.9 inches
HOW TO READ PATTERN:
Each solid square is equal to 4 double crochets. Each open square is equal to 1 double crochet, followed by 2 chains followed by 1 double crochet. The double crochet at the end of each square also counts as the first double crochet of the next square. For example, a solid square followed by an open square is 4 double crochets, 2 chains, 1 double crochet.

My Kitty Pumkin Puzzle

http://www.jigidi.com/puzzle.php?id=G50YA6ZF

Easter Egg Money Holder

Easter Egg Money Holder Tutorial Found HERE

FLEXIBLE MOLD

FLEXIBLE MOLD COMPOUND
This is new mold material is much superior to ordinary gelatin (mold glue) and is very easily made. It does not shrink or dry out like ordinary casting gelatins. If made according to directions it will retain all its original qualities indefinitely, and can be remelted when necessary.
FORMULA:
Flake Gelatin . . . . . . . 4 1/2 pounds
Water . . . . . . . . . . . . 4 1/2 pints
Glycerin . . . . . .. . . . . 9 pounds
Glucose . . . . . . . . . . .1 pound
Denatured Alcohol . . 1 ounce
PROCESS: Place the gelatin in a large container and pour the water over same; then cover container with damp cloth to prevent evaporation. Mix up thoroughly with the hands every ten minutes to keep water evenly distributed, otherwise the bottom will absorb too much water and the top portion will dry out and harden. Replace cloth after each mixing. After gelatin is thoroughly softened, squeeze out all surplus water (if any), and place in double boiler and melt. A few minutes after it begins to melt start stirring and keep stirring until the gelatin is all melted and free from lumps. Then add the glycerin (which should have previously been heated) and stir until blended. Continue to stir until all ingredients are thoroughly incorporated and remove from fire. Now add the alcohol and stir until thoroughly blended with the rest of the mixture. The compound is now ready for use. Do not add water when remelting.

A double boiler can easily be made by using two metal buckets or pans, one larger than the other. Put a few stones in the bottom of the larger container and partly fill with water. Then put mold compound into smaller container and place it in large container. There should be enough water in large container to come up at least half way on outside of small container. The stones are to prevent the small container from touching the bottom and thereby burning the mixture. Leave unused material in container in which it was melted.

HOW TO GET THE ABOVE COMPOUND TO MAKE MOLDS: First select the article you desire to duplicate. Almost all articles can be duplicated, such as celluloid novelties, metal toys, dolls, etc. Articles cast in compositions, book-ends, emblems, etc.

If the article to be cast is very simple, with one entire side flat like a book-end, emblem, or plaque, it is only necessary to lay it on some flat, smooth surface, like glass or marble, face up. Place a frame of wood or metal bars around it, having oiled the object and other parts well; then pour the pliable mold composition over it. However, for more complicated things such as door stops and novelties in forms of dogs, cats, dolls, etc., you will have to make a mold in two pieces.

To make two piece molds, plaster should be used to reinforce the mold. To make good molds you must bear in mind that both this compound and rubber gives under the weight of the casting material. Therefore, some means must be used to hold molds made from these materials in shape. It must be made so that the mold can easily be removed from the reinforcing shell so that the mold may then be removed from the casting without damaging it.

After you have applied the molding composition or last coat of rubber and compound starts to set - spread about 1/2 inch thickness of plaster mortar over it with a trowel, let set and then remove it. For full body molds in two parts - make one half, let it stand until set, cut notches in the plaster shell around the edge that will be spliced to the other half and then apply rubber and plaster to the other half. To prevent the plaster sticking, coat the splice edge of the first half with two coats of ordinary rubber cement.
RUBBER MOLDS
GUTTA-PURSHA MOLDS:
Purchase a sheet of GUTTA-PERCHA, about one-fourth of an inch thick. Cut it about size desired. Soak it in NAPTHA (which causes it to swell), then soak it in hot water. This makes the sheet of Gutta-Percha soft and mushy in appearance, somewhat like a wet rag. Then in this condition, press it against your model, slowly but firmly.
When there are small cavities such as the mouth or eyes of a figure, be sure that you get the rubber all the way in . . . the better you press it, the sharper the mold will be.
Try it on a plaque first, for that can be made in one piece mold. When it is sufficiently pressed, have some plaster mixed and pour it over the mold. This will harden quickly and so hold your rubber mold (Gutta-Percha), in place until it gradually dries out. It will then retain its shape. This plaster shell should always be used to hold mold rigid while casts are being made.
To make a mold of a figure in the round (showing both sides) the mold must be made in two pieces, with shell of plaster to hold them in place, same a described previously.

Irish Crochet Rose and Shamrock Edging

Irish Crochet Rose and Shamrock Edging 

Pattern Directions -
Abbreviations:
ch = chain
dc = double crochet
dtr = double treble
ea = each
sc = single crochet
sk = skip
sl st = slip stitch
sp = space
sps = spaces
st = stitch
sts = stitches
tr = treble

How To Slip Stitch (sl st) = Insert hook in stitch, wrap thread or yarn over hook, pull thread or yarn through the stitch and through the loop on the hook, at the same time. A slip stitch does not add any height and is used to join a chain or stitch to another place in the crochet piece.

For a double treble (dtr), the yarn or thread is wrapped around the hook 3 times before beginning the stitch. How To Do A Double Treble

In this pattern, (depending on your own crochet tension) each time that it calls for a double treble (dtr) in the second row edging directions, you may find that a triple treble will work better for you (if a double treble isn't going to comfortably reach to the stitch that it's supposed to, then you'll know that it will work better to substitute a triple treble for the double treble in that spot). How To Do A Triple Treble

Materials: Use thread size of your choice or yarn weight of your choice. Some of the most commonly used sizes are:
Size 10 cotton thread with a size 8 steel hook
Sport weight yarn with a size F hook
Worsted weight yarn with a size G hook

Rose Directions
Rose, Starting Chain: Chain 6. Join (with a slip stitch) to form a circle.
Rnd 1: ch 5 (counts as first dc and first ch-2), * Dc in circle, ch 2 **, repeat from * to ** 4 more times, join with sl st in the 3rd ch of the beginning ch-5 of round. (There should be 6 ch-2 spaces in this round.)
Rnd 2: ch 1, sc in same stitch as sl st just made at end of previous round, * 5 dc in next ch-2 sp, sc in next dc, **, repeat from * to ** around.
Rnd 3: ch 1, sl st in base in the back of the sc just made at end of previous row, * ch 5, sc in base at the back of next sc (between petals) **, repeat from * to ** around. (When finished, if the ch-5 loops are in front of the petals, pull on the chain-5 loops so that they are behind the petals, before working the next round.)
Rnd 4: ch 1, then work (sc, 7 dc, sc) all in first ch-5 sp * (sc, 7 dc, sc) all in next ch-5 sp **, repeat from * to ** around.
To finish rose: End off. Weave in ends.

For photos showing how to do parts of the rose pattern above, see this web page: http://web.archive.org/web/20070311190558/http://crochet.about.com/library/weekly/aa030803.htm

Edging Directions -
First, make the number of individual roses that will be needed for the length of the edging.
Edging is started with a shamrock: Chain 18, sl st in the 10th ch, to form a circle with part of the chain. (3 sc, 3 dc, 3 tr) in the ch-10 circle just made (this will cover half of the circle). Next, join to a rose by doing a sl st in the 4th dc (center) of any outside petal of a rose (be sure right side of rose is on the same side as right side of the started shamrock), then continue to crochet the rest of the shamrock circle, as follows: (3 tr, 3 dc, 3 sc) in remainder of the ch-10 circle (first shamrock leaf formed). Ch 10, sl st in the 10th ch of the beginning shamrock chain (this is the same spot as the base of first leaf made), for next leaf: work (3 sc, 3 dc, 6 tr, 3 dc, 3 sc) all in the ch-10 circle just made. When forming third leaf, join to next rose, as follows: Ch 10, sl st in the 10th ch of the beginning shamrock chain, (3 sc, 3 dc, 3 tr) in the ch-10 circle just made (this will cover half of the circle). Next, join to a rose by doing a sl st in the 4th dc (center) of any outside petal of a rose (be sure right side of rose is on the same side as right side of the started shamrock), then continue to crochet the rest of the shamrock circle, as follows: (3 tr, 3 dc, 3 sc) in remainder of the ch-10 circle. Sl st in base of leaf. To form shamrock stem: sc in ea of remaining 8 chains of the beginning ch-18. End off. Weave in end.

Begin another shamrock: Follow directions same as for first shamrock. The only difference is that, when you are ready to slip stitch the first shamrock leaf to a rose, instead of attaching to a new rose, you will be attaching (with a slip stitch) to the right-hand side of the last rose that you attached to the previous shamrock.
Continue for length needed: Continue making additional shamrocks and attaching roses until you have the length that you want for your edging.
Second Row: This row will be worked along the top of the joined roses and shamrocks (the top is the side with the shamrock stems.) Join thread to the center stitch of a petal of the first rose (this should be the petal which is two petals over to the right away from the petal that a shamrock leaf is attached to), ch 8, * dc in center stitch of next petal, ch 4, dtr in the sl stitch connection between the shamrock and the rose, ch 4, dc in center of side of leaf, sl st into end of stem, ch 3, skip 3 sts of stem, sl st in next st, ch 3, dc in center of side of next leaf, ch 4, dtr over connection, ch 4, dc in petal of next rose, ch 4; repeat from *.
Third Row: Ch 1 to turn, sc in ea st of previous row (in other words, sc in ea dc and in ea dtr, with 3 sc in ea ch-3 space and 4 sc in ea ch-4 space).
Fourth Row: ch 6, * skip 3 sts, dc in next sc, ch 3; repeat from *, with dc over dc of first row.
Fifth Row: Ch 1 to turn, sc in sc, 3 sc in ch-3 space, repeat across row.
To finish: End off. Weave in ends.

For comparison, here's what the 1917 Rose and Edging Directions said, exactly as written and in its entirety - 1917 Rose Directions
Materials: Richardson's R. M. C. Cordonnet No. 80 and a No. 12 hook.
For The Roses: Make 6 ch sts, join, forming a circle, 5 ch sts.
First Row: * 1 d c into circle, 2 ch sts; repeat * for 6 sps, join.
Second Row * 1 s c, 5 d c over sp, 1 s c into d c, forming 1 petal; repeat * for 6 petals.
Third Row: * 5 ch sts, 1 s c back of s c between petals; repeat * for 6 loops.
Fourth Row: * 1 s c, 7 d c, 1 s c into each loop completing rose; break thread. Make enough roses for length required.
Edging (1917 Directions): Make the roses. For the Shamrock, make 18 ch sts, sl st into the 10th st, forming circle.
First Row: 3 s c, 3 d c, 3 t c, sl st to center of petal of rose, 3 t c, 3 d c, 3 s c, all into circle, forming 1st leaf, 10 ch sts, sl st into the 10th st, 3 s c, 3 d c, 6 t c, 3 d c, 3 s c into circle, forming 2nd leaf, repeat first leaf joining to next rose, 8 s c over stem; break thread. Join rose and shamrock alternately for the length required.

Second Row: Join thread to center of petal of rose, 6 ch sts, * 1 d c into next petal, 3 ch sts, 1 d t c, over connection between shamrock and rose, 3 ch sts, 1 d c into center of side of leaf, sl st into end of stem, 3 ch sts, skip 3 sts of stem, sl st into next st, 3 ch sts, 1 d c into center of side of next leaf, 3 ch sts, 1 d t c over connection, 3 ch sts, 1 d c into petal, 3 ch sts; repeat *.
Third Row: 1 sc into each st of previous row.
Fourth Row: 7 ch sts, * skip 3 sts, 1 d c into next s c, 3 ch sts; repeat *, making dc over dc of first row.
Fifth Row: 1 sc into each st of previous row.
- - End of 1917 directions.

Crochet Card Instructions

Tutorials found for these cute cards HERE

And also HERE